Railing with safety skirting board Extension

Tecrostar mezzanines and stairs are supplied with everything you need to install the kit at its maximum surface area or height.

• All the beams and columns
• The floor panels
• All the nuts and bolts
• Wall anchors
• Assembly manual
• Anchors for anchoring the columns to the floor

Personalised phone or email service from our specialists

No, they are not. However, there are other possible combinations between ranges, in which the performance and configuration of the standard product changes (see diagram).

Low railing:

Compatible with mezzanines of the S, M and L ranges. To go ahead with the installation, you must purchase one angular strut from the corresponding mezzanine range for each railing post.

Compatible with the mezzanines of the XL range. To go ahead with the installation, you must purchase one M/L angular strut and one Adapter for Accessories in Primary Beam XL for each railing post.

Loft bed railing S, Railing S, 4-Tubes railing S and Panel railing S:

Compatible with S range mezzanines: No additional accessories are required.

Compatible with the M and L range mezzanines: To go ahead with the installation, you must purchase one M/L angular strut for each railing post. Please note that the height of the handrail is reduced.

Compatible with the mezzanine of the XL range: To go ahead with the installation, you must purchase one M/L post clamp and one Adapter for Accessories in Primary Beam XL for each handrail post. Please note that the height of the railing is reduced.

Railing M, 4-Tubes railing M and Panel railing M:

These are not compatible with S range mezzanines.

Compatible with the M and L range mezzanines: No additional accessories are required.

Compatible with the XL range mezzanines: To go ahead with the installation, you must purchase one Adapter for Accessories in Primary Beam XL for each railing post.

Railing with safety skirting board L and Public use railing L:

These are not compatible with S range mezzanines.

Compatible with the M and L range mezzanines: No additional accessories are required.

Compatible with the XL range mezzanines: To go ahead with the installation, you must purchase one Adapter for Accessories in Primary Beam XL for each railing post.

Railing with safety skirting board XL:

These are not compatible with S range mezzanines.

Compatible with the M, L and XL range mezzanines: No additional accessories are required.

All TecroStar railings are designed for installation on our mezzanines. The Railing with safety skirting board XL is the most recommended for installation on other surfaces.

This is not recommended, as to cover a space with reduced height (i.e.: attics, irregular/low ceilings, etc.) we recommend installing the Low Railing instead. This particular railing model will allow the height of the railing posts to be adjusted to the client's taste.

That depends. The railing kits are 78 3/4" long. You will have to calculate how many kits you need.

The handrails of the railing* and the stairs** are available in aluminium with the following finishes:

• Silver anodized (without additional cost)

• Black lacquered (additional cost)

• Wooden effect (additional cost)

In all cases it is suitable for outdoor use.

* The handrail of the loft bed railing is made of beech plywood.

** The spiral stairs have necessarily high-density polyethylene (HDPE) handrails in black colour.

There is a slight difference with the rest of the ranges. In order to deliver mezzanines XL, the delivery location should be accessible to a truck/long trailer (maximum mass admitted up to 36t). If there are access restrictions for this kind of trucks, there could be additional costs due to the necessity of transferring the merchandise to a smaller vehicle. Should you believe it exists any kind of restriction, please contact us.

The customer should take care of the merchandise unloading process. That unloading should be made from the lateral sides of the truck (this kind of truck do not have back liftgate).

We deliver the product packed with pallets at the bottom, so its unloading should be made preferably with a forklift.

Tecrostar products are manufactured with the most suitable materials for the proposed technical solutions, combining wood, steel and top quality aluminium.

• The steels used for beams, columns and other components are fit for structural uses with a high yield strength (S235, S275 or S3555, as required). The pieces are manufactured using maximum precision laser cutting, folding and pressing processes. Next a powder coating is applied and they are baked in the oven, offering maximum adhesion and an outstanding finish.
• Structure hardware grade 8.8
• Anodized aluminum apt for outdoor use
• The wood panels used for the mezzanine flooring can be made of European radiata pine plywood or high density structural chipboard. All the boards are tongue and groove on all four sides to prevent faults and unevenness at the joints of the modules.
• Other wooden components, such as the steps and parts of the handrails, are made from top quality beech.

TECRO has earned certification from the AEM, the federation of Spanish materials handling. We have also received a Gold Medal Award of Merit from the INPEX (Invention and New Product Exposition), the top award for innovation at the largest Invention Exposition in the USA.