-
Mezzanines S
Height between 63" and 91 3/4" – Ideal for domestic use in small areas: bedrooms, living rooms, storerooms or garages. For loads up to 3086lb.You can compare Mezzanines S
TS 5 Mezzanine
![Truckle bed TS8]( "Truckle bed TS8")
Truckle bed TS8 Colour-White
$3,181
TS 4 Mezzanine
TS 5 Mezzanine
TS 8 Mezzanine
TS 8 Mezzanine with S ladder
TS 8 Mezzanine with S ladder
Mezzanines M
Height between 68 1/8" and 111" – Ideal for high ceilings and wide areas as offices, big living rooms or lightweight storages. For loads up to 6614lb.You can compare Mezzanines M
TM 7 Mezzanine
TM 10 Mezzanine
TM 15 Mezzanine
TM 15 Mezzanine with M straight stairs
Mezzanines L
Height between 82 1/2" and 135" – Ideal for very wide areas as commercial premises or warehouses. For loads up to 18739lb. You can compare Mezzanines L
TS 5 Mezzanine
TS 5 Mezzanine
TS 4 Mezzanine
TS 8 Mezzanine
TS 8 Mezzanine with S ladder
Mezzanines XL
Height between 92 1/2" and 150" – Mezzanines for industrial premises with immediate availability. They allow the use of hand pallet trucks and have a load capacity up to 225lb/ft²
TS 5 Mezzanine
TS 5 Mezzanine
TS 4 Mezzanine
TXL 20
TXL 29
TXL 30
TXL 37
Mezzanine Extensions
Increase the surface of your mezzanine in the primary beams direction (“A” Extension) or in the secondary beams direction (“B” Extension). Add as many extensions as you need.
Extensions of the S range.
Extensions of the M range.
Extensions of the L range.
!['B' Extension TL 35]( "'B' Extension TL 35")
'B' Extension TL 35 Colour-White
$10,425
Extensions of the XL range.
![“A” Extension TXL 32]( "“A” Extension TXL 32")
“A” Extension TXL 32
$11,499![“B” Extension TXL 32]( "“B” Extension TXL 32")
“B” Extension TXL 32
$12,068
Stability Kits
Needed when the mezzanine is flush against one wall or there are no walls
Stability Kits of S range
Stability Kits of M Range
Stability Kits of L Range
Stability Kits of XL Range
![Stability Brace XL]( "Stability Brace XL")
Stability Brace XL
$416![Stability Bar XL]( "Stability Bar XL")
Stability Bar XL
$297
Compare Mezzanines
Mezzanines S
Mezzanines S
DIV
-
Stairs for reduced spaces
Stair
Industrial alternating tread stairs
Spiral Stair
Boat Ladder
Spiral Stair
Stairs
Easily accessible stairs
You can compare easily accessible stairs
Long L-shaped Adjustable Stairs
![Standard stairs with landing]( "Standard stairs with landing")
Standard stairs with landing
$4,546
Folding stairs
You can compare folding stairs
Escalera
Escalera
Telescopic aluminum ladder
Escalera
![Folding Stairs to wall 54º]( "Folding Stairs to wall 54º")
Folding Stairs to wall 54º
$1,558
Descansillo escalera
Descansillo escalera
Viga escalera
div
-
Low railing
Extension Railing
Low railing extension
Loft bed Railing
Loft bed Railing
Extension Railing
Extension Railing
Extension Railing
Extension Railing
Extension Railing
![Public Use Railing]( "Public Use Railing")
Public Use Railing
$594
Extension Railing
Extension Railing
Extension Railing
DIV
Extension Railing
div
Extension Railing
![Safety pallet gate]( "Safety pallet gate")
Safety pallet gate Colour-Yellow, Gate height-Type B, Width of the gate-Standard width (59")
$2,268The Pivot Safety Gate, also known as Anti-fall tilting...
div
Product successfully added to your shopping cart
Wall support for the flooring boards
This extra piece allows to increase the standard flight of the board from 4" to 12". It is used for cases where the loft is far from the wall and we want the board to reach it, in order to make the most of the space and finish the wood against the wall. This piece is fixed to the wall.
They include the tacos and screws for wall of brick and concrete. For other types of walls another type of fixation is necessary (not supplied)
The screws are included to fix the wood to the piece.
Are you looking for an installer?
Customers who bought this item also bought
Data sheet
| Kind of product | Accessories extra |
| Range | Small, Medium, Large, Industrial XL |
| Flooring (HF) | 11/16 inch thick European Radiata pine plywood, P4 - High-density structural chipboard with P4 quality, tongue and groove joints in its four edges and 35 mm of thickness. |
Reviews
Faqs
- The steels used for beams, columns and other components are fit for structural uses with a high yield strength (S235, S275 or S3555, as required). The pieces are manufactured using maximum precision laser cutting, folding and pressing processes. Next a powder coating is applied and they are baked in the oven, offering maximum adhesion and an outstanding finish.
- Structure hardware grade 8.8
- Anodized aluminum apt for outdoor use
- The wood panels used for the mezzanine flooring can be made of European radiata pine plywood or high density structural chipboard. All the boards are tongue and groove on all four sides to prevent faults and unevenness at the joints of the modules.
- Other wooden components, such as the steps and parts of the handrails, are made from top quality beech.
Yes, they are. Unless otherwise specified in the accesory description.
Tecrostar products are manufactured with the most suitable materials for the proposed technical solutions, combining wood, steel and top quality aluminium.
TECRO has earned certification from the AEM, the federation of Spanish materials handling. We have also received a Gold Medal Award of Merit from the INPEX (Invention and New Product Exposition), the top award for innovation at the largest Invention Exposition in the USA.
